A picture showing the bottom bracket standards "problem". From Kogel (HERE as of 2014/08).

[Kogel-bottom-bracket-chart.jpg]  

Available as a .PDF from HERE as of 2014/08; also cached HERE.

Apparent compatibility table:
[145299734.png]  

Part of the 2nd page (top chopped off):

[SpecializedS-workstechdoc_zps0adb09e7.jpg]  
Entire document from Specialized HERE as of 2014/08. Cached locally HERE

The above document lists bearings as "6808 series", but standard 6808 bearings are 40 mm ID and 52 mm OD, this is probably an error and "6806 series" is intended, with 30 mm ID, 42 mm OD, and 7 mm width.

Specialized OSBB 62 HERE as of 2014, cached HERE
BBright both direct-fit and press-fit versions: HERE as of 2014/08; cached HERE.